DW-1820S

Large Fabric Laser Cutting Machine with Vision

A wider-format fabric laser cutter with two asynchronous cutting heads on independent guide rails and a 1800 × 2000 mm one-pass cutting area.

Best fit: Wider textile panels, canvas, garment production, home textiles, and continuous roll processing

Working area: 1800 × 2000 mm
Laser power: Confirm selected configuration
Vision system: Industrial vision recognition
Feeding: Automatic roll feeding and correction frame
Laser heads: Two asynchronous heads

Request a quote Compare models

Product overview / DW-1820S

Built around your material and production flow.

The DW-1820S is introduced as a large-format vision cutter with a 1800 × 2000 mm format and two asynchronous cutting heads on independent guide rails. DOWIN presents camera recognition, servo motion, and automatic feeding for larger fabric pieces.

Parts such as banners, garments, footwear components, and canvas pieces appear in the source application gallery. Its detail page also repeats DW-1812 Pro specifications, so treat the 1820S configuration as subject to confirmation rather than copying that table.

See how it works

Official DOWIN DW-1820S machine view — Equipment image from DOWIN's published product page.

From material to finished part

How DW-1820S works.

The working sequence below follows the capabilities described in DOWIN's original listing. Feed, vision, laser, and collection settings should be tested on your material.

01
Prepare the wide format
Check the material width and part dimensions against the 1800 × 2000 mm format described in the introduction.
02
Feed and correct
Present roll-fed fabric through the automatic feeding and correction equipment where specified.
03
Recognize the artwork
Camera vision locates printed contours and aligns the cut file to the material.
04
Cut the parts
Independent guide rails support asynchronous head movement in the published product description.

Machine capabilities

What this configuration is designed to do.

Two independent guide rails

Large 1800 × 2000 mm format

Camera contour recognition

Auto feeding and alignment correction

Continuous cutting

Published specifications

The current source page contains a reused DW-1812 Pro specification tableSee project confirmation

Working format and head configuration are taken from the DW-1820S product introductionSee project confirmation

Laser power and final configuration should be confirmed before quotingSee project confirmation

View original catalog listing

Inside the configuration

The parts behind the process.

DOWIN's original page shows these systems or options. The final components and supplier models belong in a confirmed quotation.

Ask about this configuration

Large working format: The introduction identifies a 1800 × 2000 mm cutting format; verify usable width for the chosen feeder.
Camera vision: Recognition of printed or embroidered contours is described on the product page.
Two guide rails: The source intro describes asynchronous cutting heads on independent rails.
Feeding and correction: Auto-feed and correction-frame hardware are shown as part of the product family.
Cooling, extraction, and control: Component images are shown, but the detailed specification table belongs to another model. Request a confirmed 1820S bill of configuration.

Applications / DW-1820S